восстановление Dahua DVR0404HF-AN

Здравствуйте. не могли бы дать ссылку на прошивку Dahau dh-dvr0404hf-an через ком порт.
 

Вкладення

  • 1.1 КБ Перегляди: 10
Показало ошибку.

U-Boot 2010.06 (Sep 20 2012 - 19:42:06) svn:477

TI8148-GP rev 2.1

N56_DVR Run at mode: A

SF: Detected MX25L12805D with page size 256, total 16777216 bytes
Net: Detected MACID:90:2:a9:9d:26:8
cpsw
Hit any key to stop autoboot: 0
DVR> printenv
bootargs=mem=128M, console=ttyO0,115200n8 rootfstype=cramfs root=/dev/mtdblock1 earlyprintk netmode=RGMII watchdog=1
bootcmd=netup; fsload 0x80007fc0 /boot/uImage; bootm
baudrate=115200
gatewayip=192.168.1.1
dh_keyboard=1
load_modules=1
appauto=1
m3_print=1
watchdog=1
logserver=127.0.0.1
da=tftp 0x81000000 u-boot.bin.img; flwrite
dr=tftp 0x81000000 romfs-x.cramfs.img; flwrite
du=tftp 0x81000000 user-x.cramfs.img; flwrite
dw=tftp 0x81000000 web-x.cramfs.img; flwrite
dl=tftp 0x81000000 logo-x.cramfs.img; flwrite
ds=tftp 0x81000000 slave-x.cramfs.img; flwrite
dc=tftp 0x81000000 custom-x.cramfs.img; flwrite
up=tftp 0x81000000 update.img; flwrite
tk=tftp 0x81000000 uImage; bootm
verify=yes
bootfile=/boot/uImage
loadaddr=0x81000000
tu=tftp 0x81000000 u-boot.bin; go 0x81000000
ethact=cpsw
ID=PA3BU00900434
ethaddr=90:02:a9:9d:26:08
netmask=255.255.255.0
ipaddr=192.168.1.10
serverip=192.168.1.212
getewayip=192.168.1.212
netup_timeout=2
bootdelay=6
stdin=serial
stdout=serial
stderr=serial

Environment size: 994/8188 bytes
DVR> run up
Set skew to 1.4ns ...
link up on port 0, speed 1000, full duplex
Using cpsw device
TFTP from server 192.168.1.212; our IP address is 192.168.1.10
Filename 'update.img'.
Load address: 0x81000000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
###############################################################
done
Bytes transferred = 14278976 (d9e140 hex)
SF: Detected MX25L12805D with page size 256, total 16777216 bytes
SPI probe: 16384 KiB MX25L12805D at 0:0 is now current device
Dest address:0xa0e60000 invalid!
Outside available Flash
flwrite error 2!
Set skew to 1.4ns ...
link up on port 0, speed 1000, full duplex


U-Boot 2010.06 (Sep 20 2012 - 19:42:06) svn:477

TI8148-GP rev 2.1

N56_DVR Run at mode: A

SF: Detected MX25L12805D with page size 256, total 16777216 bytes
Net: Detected MACID:90:2:a9:9d:26:8
cpsw
Hit any key to stop autoboot: 0
Set skew to 1.4ns ...
link up on port 0, speed 1000, full duplex
netup time out: 2
Timeout
SF: Detected MX25L12805D with page size 256, total 16777216 bytes
SPI probe: 16384 KiB MX25L12805D at 0:0 is now current device
### CRAMFS loading '/boot/uImage' to 0x80007fc0
### CRAMFS load complete: 2430160 bytes loaded to 0x80007fc0
## Booting kernel from Legacy Image at 80007fc0 ...
Image Name: Linux-2.6.37
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2430096 Bytes = 2.3 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK

Starting kernel ... mem=128M, console=ttyO0,115200n8 rootfstype=cramfs root=/dev/mtdblock1 earlyprintk netmode=RGMII watchdog=1 notifyk.vpssm3_sva=0xBFD00000 dh_keyboard=1 load_modules=1 m3_print=1 watchdog=1

Uncompressing Linux... done, booting the kernel.
 
Dest address:0xa0e60000 invalid!
Outside available Flash
flwrite error 2!
Вы считаете что неправильное заполнение памяти из-за TFTP сервера ? Тогда посоветуйте какой лучше ?
я пользуюсь Tftpd64_SE Admin. Буду благодарен за помощь.
 

fobos

Энтузиаст
сорри, просмотрел этот invalid...тогда перебирайте прошивки, как вам Максим посоветовал
 
Зверху