Доброго всем времени суток!Камера dahua dh-ipc-hdbw1230ep-aw пингуется на 192.168.1.108,но нет возможности войти через веб интерфейс.Напряг заказчика,чтобы он снял с обьекта аналогичную рабочую камеру с целью слить дамп,но на это нужно время.может кто ,что посоветовать?Желательно дамп флеши.Да,я так и не понял какая прошивка ,через tftp ,подойдет.С индексом ep-aw не встретил.
камера dahua dh-ipc-hdbw1230ep-aw
- Автор теми aavan
- Дата створення
Oleglevsha
Левша
снимите лог, выясните hwid, по нему найдите прошивку, чем вам поможет периодичность перезагрузки без логов не ясно...
U-Boot 2010.06-svn4949 (Sep 13 2017 - 00:48:58)
I2C: ready
DRAM: 118 MiB
gBootLogPtr:00b80008.
spinor flash ID is 0xc21920c2
partition file version 2
rootfstype squashfs root /dev/mtdblock5
gParameter[0]:node=bootargs, parameter=console=ttyS0,115200 mem=118M root=/dev/mtdblock5 rootfstype=squashfs init=/linuxrc.
gParameter[1]:node=sdupdate, parameter=gpio=34 offset=0 ledtype=state.
TEXT_BASE:01000000
Net: Detected MACID:14:a7:8b:bd:a6:c3
PHY:0x001cc816,addr:0x00
s3l phy RTL8201 init
gpio:34, offset:0x0, ledtype:state
MMC: sdmmc init
Hit any key to stop autoboot: 0
backup - backup - manual backup program.
base - print or set address offset
bdinfo - print Board Info structure
boot - boot default, i.e., run 'bootcmd'
bootd - boot default, i.e., run 'bootcmd'
bootf - boot from flash
bootm - boot application image from memory
bootp - boot image via network using BOOTP/TFTP protocol
cfgRestore- erase config and backup partition.
cmp - memory compare
coninfo - print console devices and information
cp - memory copy
crc32 - checksum calculation
dcache - enable or disable data cache
dhcp - boot image via network using DHCP/TFTP protocol
echo - echo args to console
editenv - edit environment variable
erasepart- erasepart
exit - exit script
false - do nothing, unsuccessfully
fatinfo - print information about filesystem
fatload - load binary file from a dos filesystem
fatls - list files in a directory (default /)
flwrite - flwrite - write data into FLASH memory
fsinfo - print information about filesystems
fsload - load binary file from a filesystem image
go - start application at address 'addr'
gpio - gpio test
help - print command description/usage
hwid - hwid - set hardware id and save to flash
i2c - I2C sub-system
icache - enable or disable instruction cache
iminfo - print header information for application image
itest - return true/false on integer compare
kload - kload - load uImage file from parttion
lip - lip - set local ip address but not save to flash
loadb - load binary file over serial line (kermit mode)
loads - load S-Record file over serial line
loady - load binary file over serial line (ymodem mode)
logsend - get log buf
loop - infinite loop on address range
ls - list files in a directory (default /)
mac - mac - set mac address and save to flash
md - memory display
memsize - memsize - set mem size
mii - MII utility commands
mm - memory modify (auto-incrementing address)
mmc - MMC sub system
mmcinfo - mmcinfo <dev num>-- display MMC info
mtest - simple RAM read/write test
mw - memory write (fill)
nfs - boot image via network using NFS protocol
nm - memory modify (constant address)
partition- print partition information
ping - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
rarpboot- boot image via network using RARP/TFTP protocol
rdefault- rdefault -recover default env
reset - Perform RESET of the CPU
run - run commands in an environment variable
saveenv - save environment variables to persistent storage
setenv - set environment variables
sf - SPI flash sub-system
showvar - print local hushshell variables
sip - sip - set server ip address but not save to flash
sleep - delay execution for some time
source - run script from memory
sync_uboot- sync_uboot - sync uboot to uboot-bak
test - minimal test like /bin/sh
tftpboot- tftpboot- boot image via network using TFTP protocol
true - do nothing, successfully
upmh - mcu heat upgraded
usleep - delay execution for some time
version - print monitor version
bootcmd=sf read 0x2000000 0xf0000 0x180000;bootm 0x2000000
bootdelay=3
baudrate=115200
ipaddr=192.168.1.108
serverip=192.168.1.1
autoload=yes
gatewayip=192.168.1.1
netmask=255.255.255.0
da=tftp 0x02000000 dhboot.bin.img; flwrite;tftp dhboot-min.bin.img;flwrite
dr=tftp 0x02000000 romfs-x.squashfs.img; flwrite
dk=tftp 0x02000000 kernel.img; flwrite
du=tftp 0x02000000 user-x.squashfs.img; flwrite
dw=tftp 0x02000000 web-x.squashfs.img; flwrite
dp=tftp 0x02000000 partition-x.cramfs.img;flwrite
dc=tftp 0x02000000 custom-x.squashfs.img; flwrite
up=tftp 0x02000000 update.img; flwrite
tk=tftp 0x02000000 uImage; bootm
dh_keyboard=1
sysbackup=1
logserver=127.0.0.1
loglevel=4
autosip=192.168.254.254
autolip=192.168.1.108
autogw=192.168.1.1
autonm=255.255.255.0
pd=tftp 0x02000000 pd-x.squashfs.img; flwrite
ethact=ambarella mac
BSN=3J05A28PAQ00079
HWID=IPC-HDBW1230E-AW:01:02:03:4F:25:00:01:0E:01:01:04:2D0:03:02:00:00:00:00:00:00:100
hwidEx=00:02:00:00:00:00:00:01:00:00:00:00:00:00:00:00
devalias=IPC-HDBW1230E-AW
ID=3L06E56PAG00009
wifiaddr=14:A7:8B
A6:EB
ethaddr=14:A7:8BA6:C3
filesize=1040
fileaddr=2000000
appauto=1
stdin=serial
stdout=serial
stderr=serial
Environment size: 1262/131068 bytes
I2C: ready
DRAM: 118 MiB
gBootLogPtr:00b80008.
spinor flash ID is 0xc21920c2
partition file version 2
rootfstype squashfs root /dev/mtdblock5
gParameter[0]:node=bootargs, parameter=console=ttyS0,115200 mem=118M root=/dev/mtdblock5 rootfstype=squashfs init=/linuxrc.
gParameter[1]:node=sdupdate, parameter=gpio=34 offset=0 ledtype=state.
TEXT_BASE:01000000
Net: Detected MACID:14:a7:8b:bd:a6:c3
PHY:0x001cc816,addr:0x00
s3l phy RTL8201 init
gpio:34, offset:0x0, ledtype:state
MMC: sdmmc init
Hit any key to stop autoboot: 0
Unknown command '****help' - try 'help'
? - alias for 'help'
backup - backup - manual backup program.
base - print or set address offset
bdinfo - print Board Info structure
boot - boot default, i.e., run 'bootcmd'
bootd - boot default, i.e., run 'bootcmd'
bootf - boot from flash
bootm - boot application image from memory
bootp - boot image via network using BOOTP/TFTP protocol
cfgRestore- erase config and backup partition.
cmp - memory compare
coninfo - print console devices and information
cp - memory copy
crc32 - checksum calculation
dcache - enable or disable data cache
dhcp - boot image via network using DHCP/TFTP protocol
echo - echo args to console
editenv - edit environment variable
erasepart- erasepart
exit - exit script
false - do nothing, unsuccessfully
fatinfo - print information about filesystem
fatload - load binary file from a dos filesystem
fatls - list files in a directory (default /)
flwrite - flwrite - write data into FLASH memory
fsinfo - print information about filesystems
fsload - load binary file from a filesystem image
go - start application at address 'addr'
gpio - gpio test
help - print command description/usage
hwid - hwid - set hardware id and save to flash
i2c - I2C sub-system
icache - enable or disable instruction cache
iminfo - print header information for application image
itest - return true/false on integer compare
kload - kload - load uImage file from parttion
lip - lip - set local ip address but not save to flash
loadb - load binary file over serial line (kermit mode)
loads - load S-Record file over serial line
loady - load binary file over serial line (ymodem mode)
logsend - get log buf
loop - infinite loop on address range
ls - list files in a directory (default /)
mac - mac - set mac address and save to flash
md - memory display
memsize - memsize - set mem size
mii - MII utility commands
mm - memory modify (auto-incrementing address)
mmc - MMC sub system
mmcinfo - mmcinfo <dev num>-- display MMC info
mtest - simple RAM read/write test
mw - memory write (fill)
nfs - boot image via network using NFS protocol
nm - memory modify (constant address)
partition- print partition information
ping - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
rarpboot- boot image via network using RARP/TFTP protocol
rdefault- rdefault -recover default env
reset - Perform RESET of the CPU
run - run commands in an environment variable
saveenv - save environment variables to persistent storage
setenv - set environment variables
sf - SPI flash sub-system
showvar - print local hushshell variables
sip - sip - set server ip address but not save to flash
sleep - delay execution for some time
source - run script from memory
sync_uboot- sync_uboot - sync uboot to uboot-bak
test - minimal test like /bin/sh
tftpboot- tftpboot- boot image via network using TFTP protocol
true - do nothing, successfully
upmh - mcu heat upgraded
usleep - delay execution for some time
version - print monitor version
bootargs=console=ttyS0,115200 mem=118M root=/dev/mtdblock5 rootfstype=squashfs init=/linuxrc
bootcmd=sf read 0x2000000 0xf0000 0x180000;bootm 0x2000000
bootdelay=3
baudrate=115200
ipaddr=192.168.1.108
serverip=192.168.1.1
autoload=yes
gatewayip=192.168.1.1
netmask=255.255.255.0
da=tftp 0x02000000 dhboot.bin.img; flwrite;tftp dhboot-min.bin.img;flwrite
dr=tftp 0x02000000 romfs-x.squashfs.img; flwrite
dk=tftp 0x02000000 kernel.img; flwrite
du=tftp 0x02000000 user-x.squashfs.img; flwrite
dw=tftp 0x02000000 web-x.squashfs.img; flwrite
dp=tftp 0x02000000 partition-x.cramfs.img;flwrite
dc=tftp 0x02000000 custom-x.squashfs.img; flwrite
up=tftp 0x02000000 update.img; flwrite
tk=tftp 0x02000000 uImage; bootm
dh_keyboard=1
sysbackup=1
logserver=127.0.0.1
loglevel=4
autosip=192.168.254.254
autolip=192.168.1.108
autogw=192.168.1.1
autonm=255.255.255.0
pd=tftp 0x02000000 pd-x.squashfs.img; flwrite
ethact=ambarella mac
BSN=3J05A28PAQ00079
HWID=IPC-HDBW1230E-AW:01:02:03:4F:25:00:01:0E:01:01:04:2D0:03:02:00:00:00:00:00:00:100
hwidEx=00:02:00:00:00:00:00:01:00:00:00:00:00:00:00:00
devalias=IPC-HDBW1230E-AW
ID=3L06E56PAG00009
wifiaddr=14:A7:8B
A6:EBethaddr=14:A7:8B
A6:C3filesize=1040
fileaddr=2000000
appauto=1
stdin=serial
stdout=serial
stderr=serial
Environment size: 1262/131068 bytes
Oleglevsha
Левша
попробуйте эту прошивку
U-Boot 2010.06-svn4949 (Sep 13 2017 - 00:48:58)
I2C: ready
DRAM: 118 MiB
gBootLogPtr:00b80008.
spinor flash ID is 0xc21920c2
partition file version 2
rootfstype squashfs root /dev/mtdblock5
gParameter[0]:node=bootargs, parameter=console=ttyS0,115200 mem=118M root=/dev/mtdblock5 rootfstype=squashfs init=/linuxrc.
gParameter[1]:node=sdupdate, parameter=gpio=34 offset=0 ledtype=state.
TEXT_BASE:01000000
Net: Detected MACID:14:a7:8b:bd:a6:c3
PHY:0x001cc816,addr:0x00
s3l phy RTL8201 init
gpio:34, offset:0x0, ledtype:state
MMC: sdmmc init
Hit any key to stop autoboot: 0
Erasing SPI flash...
Writing to SPI flash...
done
остальное в архиве,не поместилось
I2C: ready
DRAM: 118 MiB
gBootLogPtr:00b80008.
spinor flash ID is 0xc21920c2
partition file version 2
rootfstype squashfs root /dev/mtdblock5
gParameter[0]:node=bootargs, parameter=console=ttyS0,115200 mem=118M root=/dev/mtdblock5 rootfstype=squashfs init=/linuxrc.
gParameter[1]:node=sdupdate, parameter=gpio=34 offset=0 ledtype=state.
TEXT_BASE:01000000
Net: Detected MACID:14:a7:8b:bd:a6:c3
PHY:0x001cc816,addr:0x00
s3l phy RTL8201 init
gpio:34, offset:0x0, ledtype:state
MMC: sdmmc init
Hit any key to stop autoboot: 0
Saving Environment to SPI Flash...
Erasing SPI flash...
Writing to SPI flash...
done
resetting ...
остальное в архиве,не поместилось
