Dahua DH-IPC-HFW4631H-ZSA

Статус
Закрита.

czGif

New member
Привет всем,

Мне нужна помощь У меня есть камера, на которую была загружена некорректная прошивка.
это китайская камера DH-IPC-HFW4631H-ZSA оригинальная прошивка была 2.460.0000000.16.R, Build Date: 2017-09-04.
Я попробовал прошивку, но она не работает. Мне нужна прошивка и HWID и хороший совет :)

log from serial console:

U-Boot 2010.06-svn4911 (Sep 04 2017 - 11:31:28)
I2C: ready
DRAM: 118 MiB
gBootLogPtr:00b80008.
spinor flash ID is 0x1940ef
partition file version 2
rootfstype squashfs root /dev/mtdblock5
can not search bootargs settings
fail to parse bootargsParametersV2.text info
fail to init bootargsParametersV2
TEXT_BASE:01000000
Net: Detected MACID:bc:32:5f:3f🇪🇨c1
PHY:0x001cc816,addr:0x00
s3l phy RTL8201 init

MMC: sdmmc init
Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.251; sending through gateway 192.168.1.1
Download Filename 'upgrade_info_7db780a713a4.txt'.
Download to address: 0x5000000
Downloading: *
Retry count exceeded; starting again
Try again use backup_serverip
*** ERROR: `serverip' not set
Failed to get info.txt
Fail to get info file!
Init error!
Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.251; sending through gateway 192.168.1.1
Download Filename 'failed.txt'.
Download to address: 0x2000000
Downloading: *
Retry count exceeded; starting again
Support backupVer:255
state:ff,err_count:03
SPI probe: 32768 KiB W25Q256FV at 0:0 is now current device
## Booting kernel from Legacy Image at 02000000 ...
Image Name: Linux-3.10.73
Created: 2019-03-06 18:42:53 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1570432 Bytes = 1.5 MiB
Load Address: 00208000
Entry Point: 00208000
Verifying Checksum ... OK
Loading Kernel Image ...OK
OK
partition file version 2
rootfstype squashfs root /dev/mtdblock5
fail to load bootargsParameters.txt
fail to load bootargsParameters.txt file
get bootargs info failed
unknown phy memory type, use default
crashflasg:1, logmagic:54410011.

Starting kernel ...
unknown core,use back


Спасибо за помощь Radim
 

Техпідтримка VidiMost.com

Спеціаліст
Команда форуму
Вам нужно найти точно такую же модель и скопировать из нее чип памяти с помощью программатора, а потом заменить серийный номер и МАК-адрес с помощью UART
 
Статус
Закрита.
Зверху