• В случае если Вы не можете зарегистрироваться на сайте VIDIMOST.COM, напишите личным сообщением причину и Ваш номер телефона пользователю Максим support ViDiMOST

Dahua IPC-HDBW2431RP-ZS востановление

Vrolok

Member
Приветствую. Подскажите в чем может быть проблема. Лог через UART прилагаю.
Код:
U-Boot 2010.06-svn3845 (Dec 18 2016 - 09:32:48)
I2C:   ready
DRAM:  118 MiB
gBootLogPtr:00b80008.
spinor flash ID is 0x1940ef
partition file version 2
rootfstype squashfs root /dev/mtdblock5
gParameter[0]:node=bootargs, parameter=console=ttyS0,115200 mem=118M root=/dev/m                                                                                                                                                             tdblock5 rootfstype=squashfs init=/linuxrc.
TEXT_BASE:01000000
Net:   Detected MACID:e0:50:8b:99:64:04
PHY:0x001cc816,addr:0x00
s3l phy RTL8201 init

MMC:   sdmmc init
Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending throu                                                                                                                                                             gh gateway 192.168.1.1
Download Filename 'upgrade_info_7db780a713a4.txt'.
Download to address: 0x5000000
Downloading: *
Retry count exceeded; starting again
Try again use backup_serverip
*** ERROR: `serverip' not set
Failed to get info.txt
Fail to get info file!
Init error!
Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending throu                                                                                                                                                             gh gateway 192.168.1.1
Download Filename 'failed.txt'.
Download to address: 0x2000000
Downloading: *
Retry count exceeded; starting again
state:ff,err_count:03
SPI probe: 32768 KiB W25Q256FV at 0:0 is now current device
## Booting kernel from Legacy Image at 02000000 ...
   Image Name:   Linux-3.10.73
   Created:      2017-02-16   5:53:38 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1485310 Bytes = 1.4 MiB
   Load Address: 00208000
   Entry Point:  00208000
   Verifying Checksum ... OK
   Loading Kernel Image ...OK
OK
partition file version 2
rootfstype squashfs root /dev/mtdblock5
fail to load bootargsParameters.txt
fail to load bootargsParameters.txt file
crashflasg:1, logmagic:54410011.

Starting kernel ...
▒

U-Boot 2010.06-svn3845 (Dec 18 2016 - 09:32:48)
I2C:   ready
DRAM:  118 MiB
gBootLogPtr:00b80008.
spinor flash ID is 0x1940ef
partition file version 2
rootfstype squashfs root /dev/mtdblock5
gParameter[0]:node=bootargs, parameter=console=ttyS0,115200 mem=118M root=/dev/mtdblock5 rootfstype=squashfs init=/linuxrc.
TEXT_BASE:01000000
Net:   Detected MACID:e0:50:8b:99:64:04
PHY:0x001cc816,addr:0x00
s3l phy RTL8201 init

MMC:   sdmmc init
Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Download Filename 'upgrade_info_7db780a713a4.txt'.
Download to address: 0x5000000
Downloading: *
Retry count exceeded; starting again
Try again use backup_serverip
*** ERROR: `serverip' not set
Failed to get info.txt
Fail to get info file!
Init error!
Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Download Filename 'failed.txt'.
Download to address: 0x2000000
Downloading: *
Retry count exceeded; starting again
state:ff,err_count:04
SPI probe: 32768 KiB W25Q256FV at 0:0 is now current device
## Booting kernel from Legacy Image at 02000000 ...
   Image Name:   Linux-3.10.73
   Created:      2017-02-16   5:53:38 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1485310 Bytes = 1.4 MiB
   Load Address: 00208000
   Entry Point:  00208000
   Verifying Checksum ... OK
   Loading Kernel Image ...OK
OK
partition file version 2
rootfstype squashfs root /dev/mtdblock5
fail to load bootargsParameters.txt
fail to load bootargsParameters.txt file

Starting kernel ...
▒

U-Boot 2010.06-svn3845 (Dec 18 2016 - 09:32:48)
I2C:   ready
DRAM:  118 MiB
gBootLogPtr:00b80008.
spinor flash ID is 0x1940ef
partition file version 2
rootfstype squashfs root /dev/mtdblock5
gParameter[0]:node=bootargs, parameter=console=ttyS0,115200 mem=118M root=/dev/m                                                                                                                                                             tdblock5 rootfstype=squashfs init=/linuxrc.
TEXT_BASE:01000000
Net:   Detected MACID:e0:50:8b:99:64:04
PHY:0x001cc816,addr:0x00
s3l phy RTL8201 init

MMC:   sdmmc init
Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending throu                                                                                                                                                             gh gateway 192.168.1.1
Download Filename 'upgrade_info_7db780a713a4.txt'.
Download to address: 0x5000000
Downloading: *
Retry count exceeded; starting again
Try again use backup_serverip
*** ERROR: `serverip' not set
Failed to get info.txt
Fail to get info file!
Init error!
Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending throu                                                                                                                                                             gh gateway 192.168.1.1
Download Filename 'failed.txt'.
Download to address: 0x2000000
Downloading: *
Retry count exceeded; starting again
state:ff,err_count:05
SPI probe: 32768 KiB W25Q256FV at 0:0 is now current device
## Booting kernel from Legacy Image at 02000000 ...
   Image Name:   Linux-3.10.73
   Created:      2017-04-28   7:36:47 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    916548 Bytes = 895.1 KiB
   Load Address: 00208000
   Entry Point:  00208000
   Verifying Checksum ... OK
   Loading Kernel Image ...OK
OK
partition file version 2
rootfstype squashfs root /dev/mtdblock5
fail to load bootargsParameters.txt
fail to load bootargsParameters.txt file
get bootargs info failed

Starting kernel ...
init started: BusyBox v1.18.4 (2016-11-14 11:17:47 CST)
mount: mounting none on /proc/bus/usb failed: No such file or directory
mount: mounting tmpfs on /var failed: Invalid argument
mount: mounting /dev/mtdblock3 on /mnt/custom failed: Invalid argument
mount: mounting /dev/mtdblock4 on /mnt/pd failed: Invalid argument
mount: mounting /dev/mtdblock8 on /mnt/afix/autoFix failed: Invalid argument
mount: mounting /dev/mtdblock9 on /mnt/afix/autoFixBackup failed: Invalid argume                                                                                                                                                             nt


BusyBox v1.18.4 (2016-11-14 11:17:47 CST) built-in shell (ash)
Revision: 20442
Enter 'help' for a list of built-in commands.

/bin/sh: can't access tty; job control turned off
~ # UPGRADED_MSG: Do memlock
[libpdi] Support backup partition !!!
[libpdi]  Flashtype = 3,patSize = 40000,rwSize = 10000,ersSize = 10000
pPartionId = 9
eth0:
MAC: <e0:50:8b:99:64:04>
[libpdi] ERROR  (save_Attr_file|1269): open failed for PRIO[libpdi] set eth0 as                                                                                                                                                              defaultEth
IP: <192.168.1.108>             netmask: <255.255.255.0>
[libpdi] ERROR  (save_Attr_file|1269): open failed for HOSTIP[libpdi] ERROR  (PD                                                                                                                                                             I_rtcWriteSram|162): Fail to ioctl rtc
[libpdi] ERROR  (SaveEthAttrInFile|1368): Fail to write ip paramenters
[libpdi] ERROR  (save_Attr_file|1269): open failed for SUBMASK[libpdi] ERROR  (P                                                                                                                                                             DI_rtcWriteSram|162): Fail to ioctl rtc
[libpdi] ERROR  (SaveEthAttrInFile|1368): Fail to write ip paramenters
SOCK_PACKET: Address family not supported by protocol
[libpdi] [libPDI] Gateway: <192.168.1.1>
[libpdi] SetGateWay success
[libpdi] ERROR  (save_Attr_file|1269): open failed for GATEWAYIP[libpdi] ERROR                                                                                                                                                               (PDI_rtcWriteSram|162): Fail to ioctl rtc
[libpdi] ERROR  (SaveEthAttrInFile|1368): Fail to write ip paramenters
SOCK_PACKET: Address family not supported by protocol
[libpdi] [libPDI] Name: upgraded, bulid date: Apr 13 2015 15:03:44, svn: 492
UPGRADED_MSG: start download file!
UPG▒
 

Vrolok

Member
После прошивки, прошивка загружается но ядро не может запустится и просто виснет. Пробовал грузить DH_IPC-HX2X3X-Rhea_MultiLang_PN_Stream2_V2.800.0000013.0.R.191202 и NP версию. Реакции 0
Лог прошивки
Код:
U-Boot 2010.06-svn3845 (Dec 18 2016 - 09:32:48)
I2C:   ready
DRAM:  118 MiB
gBootLogPtr:00b80008.
spinor flash ID is 0x1940ef
partition file version 2
rootfstype squashfs root /dev/mtdblock5
gParameter[0]:node=bootargs, parameter=console=ttyS0,115200 mem=118M root=/dev/m                   tdblock5 rootfstype=squashfs init=/linuxrc.
TEXT_BASE:01000000
Net:   Detected MACID:e0:50:8b:99:64:04
PHY:0x001cc816,addr:0x00
s3l phy RTL8201 init

MMC:   sdmmc init
Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending throu                   gh gateway 192.168.1.1
Download Filename 'upgrade_info_7db780a713a4.txt'.
Download to address: 0x5000000
Downloading: *
Retry count exceeded; starting again
Try again use backup_serverip
*** ERROR: `serverip' not set
Failed to get info.txt
Fail to get info file!
Init error!
Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending throu                   gh gateway 192.168.1.1
Download Filename 'failed.txt'.
Download to address: 0x2000000
Downloading: *
Retry count exceeded; starting again
state:ff,err_count:00
SPI probe: 32768 KiB W25Q256FV at 0:0 is now current device
Wrong Image Format for bootm command
ERROR: can't get kernel image!
try:kload 0x2000000 succeed!
## Booting kernel from Legacy Image at 02000000 ...
   Image Name:   Linux-3.10.73
   Created:      2019-11-27  10:36:14 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1571472 Bytes = 1.5 MiB
   Load Address: 00208000
   Entry Point:  00208000
   Verifying Checksum ... OK
   Loading Kernel Image ...OK
OK
partition file version 2
rootfstype squashfs root /dev/mtdblock5
fail to load bootargsParameters.txt
fail to load bootargsParameters.txt file
crashflasg:1, logmagic:54410011.

Starting kernel ...
▒

U-Boot 2010.06-svn3845 (Dec 18 2016 - 09:32:48)
I2C:   ready
DRAM:  118 MiB
gBootLogPtr:00b80008.
spinor flash ID is 0x1940ef
partition file version 2
rootfstype squashfs root /dev/mtdblock5
gParameter[0]:node=bootargs, parameter=console=ttyS0,115200 mem=118M root=/dev/mtdblock5 rootfstype=squashfs init=/linuxrc.
TEXT_BASE:01000000
Net:   Detected MACID:e0:50:8b:99:64:04
PHY:0x001cc816,addr:0x00
s3l phy RTL8201 init

MMC:   sdmmc init
Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Download Filename 'upgrade_info_7db780a713a4.txt'.
Download to address: 0x5000000
Downloading: #################################################
done
Bytes transferred = 201 (c9 hex)
Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Download Filename 'romfs-x.squashfs.img'.
Download to address: 0x2000000
Downloading: #################################################
done
Bytes transferred = 3303672 (3268f8 hex)

## Checking Image at 02000000 ...
   Legacy image found
   Image Name:   romfs
   Created:      2019-12-02   7:54:39 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3303608 Bytes = 3.2 MiB
   Load Address: 01b80000
   Entry Point:  01fd0000
   Verifying Checksum ... OK
Programing start at: 0x01b80000
SPI probe: 32768 KiB W25Q256FV at 0:1 is now current device
write : 100%
done
Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Download Filename 'kernel.img'.
Download to address: 0x2000000
Downloading: #################################################
done
Bytes transferred = 1576064 (180c80 hex)

## Checking Image at 02000000 ...
   Legacy image found
   Image Name:   kernel
   Created:      2019-12-02   7:45:28 UTC
   Image Type:   ARM Linux Firmware (uncompressed)
   Data Size:    1576000 Bytes = 1.5 MiB
   Load Address: 01040000
   Entry Point:  01200000
   Verifying Checksum ... OK
Programing start at: 0x01040000
SPI probe: 32768 KiB W25Q256FV at 0:1 is now current device
write : 100%
done
Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Download Filename 'user-x.squashfs.img'.
Download to address: 0x2000000
Downloading: #################################################
done
Bytes transferred = 13224184 (c9c8f8 hex)

## Checking Image at 02000000 ...
   Legacy image found
   Image Name:   user
   Created:      2019-12-02   7:54:15 UTC
   Image Type:   ARM Linux Standalone Program (uncompressed)
   Data Size:    13224120 Bytes = 12.6 MiB
   Load Address: 000f0000
   Entry Point:  01000000
   Verifying Checksum ... OK
Programing start at: 0x000f0000
write : 100%
done
Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Download Filename 'web-x.squashfs.img'.
Download to address: 0x2000000
Downloading: #################################################
done
Bytes transferred = 4888824 (4a98f8 hex)

## Checking Image at 02000000 ...
   Legacy image found
   Image Name:   web
   Created:      2019-12-02   7:53:49 UTC
   Image Type:   ARM Linux Standalone Program (uncompressed)
   Data Size:    4888760 Bytes = 4.7 MiB
   Load Address: 01200000
   Entry Point:  01880000
   Verifying Checksum ... OK
Programing start at: 0x01200000
SPI probe: 32768 KiB W25Q256FV at 0:1 is now current device
write : 100%
done
Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Download Filename 'partition-x.cramfs.img'.
Download to address: 0x2000000
Downloading: #################################################
done
Bytes transferred = 6392 (18f8 hex)

## Checking Image at 02000000 ...
   Legacy image found
   Image Name:   partition
   Created:      2019-12-02   7:45:27 UTC
   Image Type:   ARM Linux Standalone Program (uncompressed)
   Data Size:    6328 Bytes = 6.2 KiB
   Load Address: 000e0000
   Entry Point:  000f0000
   Verifying Checksum ... OK
Programing start at: 0x000e0000
write : 100%
done
Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Download Filename 'custom-x.squashfs.img'.
Download to address: 0x2000000
Downloading: #################################################
done
Bytes transferred = 751864 (b78f8 hex)

## Checking Image at 02000000 ...
   Legacy image found
   Image Name:   custom
   Created:      2019-12-02   8:01:29 UTC
   Image Type:   ARM Linux Standalone Program (uncompressed)
   Data Size:    751800 Bytes = 734.2 KiB
   Load Address: 018a0000
   Entry Point:  01970000
   Verifying Checksum ... OK
Programing start at: 0x018a0000
SPI probe: 32768 KiB W25Q256FV at 0:1 is now current device
write : 100%
done
Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Download Filename 'pd-x.squashfs.img'.
Download to address: 0x2000000
Downloading: #################################################
done
Bytes transferred = 55544 (d8f8 hex)

## Checking Image at 02000000 ...
   Legacy image found
   Image Name:   pd
   Created:      2019-12-02   8:01:27 UTC
   Image Type:   ARM Linux Standalone Program (uncompressed)
   Data Size:    55480 Bytes = 54.2 KiB
   Load Address: 01880000
   Entry Point:  018a0000
   Verifying Checksum ... OK
Programing start at: 0x01880000
SPI probe: 32768 KiB W25Q256FV at 0:1 is now current device
write : 100%
done
Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Download Filename '.FLASHING_DONE_STOP_TFTP_NOW'.
Download to address: 0x2000000
Downloading: #
done
partition file version 2
rootfstype squashfs root /dev/mtdblock5
fail to load bootargsParameters.txt
fail to load bootargsParameters.txt file
cmdLine console=ttyS0,115200 mem=118M root=/dev/mtdblock5 rootfstype=squashfs init=/linuxrc
Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Download Filename 'success.txt'.
Download to address: 0x2000000
Downloading: *
TFTP error: (0)Erasing SPI flash...
Writing to SPI flash...
done
state:ff,err_count:00
Wrong Image Format for bootm command
ERROR: can't get kernel image!
try:kload 0x2000000 succeed!
## Booting kernel from Legacy Image at 02000000 ...
   Image Name:   Linux-3.10.73
   Created:      2019-11-27  10:36:14 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1571472 Bytes = 1.5 MiB
   Load Address: 00208000
   Entry Point:  00208000
   Verifying Checksum ... OK
   Loading Kernel Image ...OK
OK
partition file version 2
rootfstype squashfs root /dev/mtdblock5
fail to load bootargsParameters.txt
fail to load bootargsParameters.txt file
crashflasg:1, logmagic:54410011.

Starting kernel ...
 

Vrolok

Member
И второй лог, заливал по адресу памяти 0x02000000 :

Код:
Ncat: Version 7.40 ( https://nmap.org/ncat )

Ncat: Listening on 192.168.254.254:5002

gBootLogPtr:00b80008.

spinor flash ID is 0x1940ef

partition file version 2

rootfstype squashfs root /dev/mtdblock5

gParameter[0]:node=bootargs, parameter=console=ttyS0,115200 mem=118M root=/dev/m

tdblock5 rootfstype=squashfs init=/linuxrc.

TEXT_BASE:01000000

Net:   Detected MACID:e0:50:8b:99:64:04

PHY:0x001cc816,addr:0x00

s3l phy RTL8201 init

MMC:   sdmmc init

Using ambarella mac device

TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending throu

gh gateway 192.168.1.1Download Filename 'upgrade_info_7db780a713a4.txt'.Download

to address: 0x5000000

Downloading: *

done

Bytes transferred = 201 (c9 hex)

Using ambarella mac device

TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending throu

gh gateway 192.168.1.1Download Filename 'romfs-x.squashfs.img'.Download to addre

ss: 0x2000000

Downloading: *

done

Bytes transferred = 3303672 (3268f8 hex)



## Checking Image at 02000000 ...

   Legacy image found

   Image Name:   romfs

   Created:      2019-12-02   7:54:39 UTC

   Image Type:   ARM Linux Kernel Image (uncompressed)

   Data Size:    3303608 Bytes = 3.2 MiB

   Load Address: 01b80000

   Entry Point:  01fd0000

   Verifying Checksum ... OK

Programing start at: 0x01b80000

SPI probe: 32768 KiB W25Q256FV at 0:1 is now current device

write : 100%

done

Using ambarella mac device

TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending throu

gh gateway 192.168.1.1Download Filename 'kernel.img'.Download to address: 0x2000

000

Downloading: *

done

Bytes transferred = 1576064 (180c80 hex)



## Checking Image at 02000000 ...

   Legacy image found

   Image Name:   kernel

   Created:      2019-12-02   7:45:28 UTC

   Image Type:   ARM Linux Firmware (uncompressed)

   Data Size:    1576000 Bytes = 1.5 MiB

   Load Address: 01040000

   Entry Point:  01200000

   Verifying Checksum ... OK

Programing start at: 0x01040000

SPI probe: 32768 KiB W25Q256FV at 0:1 is now current device

write : 100%

done

Using ambarella mac device

TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending throu

gh gateway 192.168.1.1Download Filename 'user-x.squashfs.img'.Download to addres

s: 0x2000000

Downloading: *

done

Bytes transferred = 13224184 (c9c8f8 hex)



## Checking Image at 02000000 ...

   Legacy image found

   Image Name:   user

   Created:      2019-12-02   7:54:15 UTC

   Image Type:   ARM Linux Standalone Program (uncompressed)

   Data Size:    13224120 Bytes = 12.6 MiB

   Load Address: 000f0000

   Entry Point:  01000000

   Verifying Checksum ... OK

Programing start at: 0x000f0000

write : 100%

done

Using ambarella mac device

TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending throu

gh gateway 192.168.1.1Download Filename 'web-x.squashfs.img'.Download to address

: 0x2000000

Downloading: *

done

Bytes transferred = 4888824 (4a98f8 hex)



## Checking Image at 02000000 ...

   Legacy image found

   Image Name:   web

   Created:      2019-12-02   7:53:49 UTC

   Image Type:   ARM Linux Standalone Program (uncompressed)

   Data Size:    4888760 Bytes = 4.7 MiB

   Load Address: 01200000

   Entry Point:  01880000

   Verifying Checksum ... OK

Programing start at: 0x01200000

SPI probe: 32768 KiB W25Q256FV at 0:1 is now current device

write : 100%

done

Using ambarella mac device

TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending throu

gh gateway 192.168.1.1Download Filename 'partition-x.cramfs.img'.Download to add

ress: 0x2000000

Downloading: *

done

Bytes transferred = 6392 (18f8 hex)



## Checking Image at 02000000 ...

   Legacy image found

   Image Name:   partition

   Created:      2019-12-02   7:45:27 UTC

   Image Type:   ARM Linux Standalone Program (uncompressed)

   Data Size:    6328 Bytes = 6.2 KiB

   Load Address: 000e0000

   Entry Point:  000f0000

   Verifying Checksum ... OK

Programing start at: 0x000e0000

write : 100%

done

Using ambarella mac device

TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending throu

gh gateway 192.168.1.1Download Filename 'custom-x.squashfs.img'.Download to addr

ess: 0x2000000

Downloading: *

done

Bytes transferred = 751864 (b78f8 hex)



## Checking Image at 02000000 ...

   Legacy image found

   Image Name:   custom

   Created:      2019-12-02   8:01:29 UTC

   Image Type:   ARM Linux Standalone Program (uncompressed)

   Data Size:    751800 Bytes = 734.2 KiB

   Load Address: 018a0000

   Entry Point:  01970000

   Verifying Checksum ... OK

Programing start at: 0x018a0000

SPI probe: 32768 KiB W25Q256FV at 0:1 is now current device

write : 100%

done

Using ambarella mac device

TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending throu

gh gateway 192.168.1.1Download Filename 'pd-x.squashfs.img'.Download to address:

0x2000000

Downloading: *

done

Bytes transferred = 55544 (d8f8 hex)



## Checking Image at 02000000 ...

   Legacy image found

   Image Name:   pd

   Created:      2019-12-02   8:01:27 UTC

   Image Type:   ARM Linux Standalone Program (uncompressed)

   Data Size:    55480 Bytes = 54.2 KiB

   Load Address: 01880000

   Entry Point:  018a0000

   Verifying Checksum ... OK

Programing start at: 0x01880000

SPI probe: 32768 KiB W25Q256FV at 0:1 is now current device

write : 100%

done

Using ambarella mac device

TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending throu

gh gateway 192.168.1.1Download Filename '.FLASHING_DONE_STOP_TFTP_NOW'.Download

to address: 0x2000000

Downloading: *

done

partition file version 2

rootfstype squashfs root /dev/mtdblock5

fail to load bootargsParameters.txt

fail to load bootargsParameters.txt file

cmdLine console=ttyS0,115200 mem=118M root=/dev/mtdblock5 rootfstype=squashfs in

it=/linuxrc
 

Vrolok

Member
где была куплена камера?
Сложно сказать честно говоря(досталась с словами не работает). Инструкция была на польском. Предпологаю что выпущена для европейкого рынка.Вот фото серийника если это что то даст
 

Вложения

Максим Шелест

Специалист компании VIDIMOST
остановите загрузку и дайте printenv и выложите содержимое только без ID=
 

Vrolok

Member
Код:
U-Boot 2010.06-svn3845 (Dec 18 2016 - 09:32:48)
I2C:   ready
DRAM:  118 MiB
gBootLogPtr:00b80008.
spinor flash ID is 0x1940ef
partition file version 2
rootfstype squashfs root /dev/mtdblock5
gParameter[0]:node=bootargs, parameter=console=ttyS0,115200 mem=118M root=/dev/m                                                                                                                                                             tdblock5 rootfstype=squashfs init=/linuxrc.
▒

U-Boot 2010.06-svn3845 (Dec 18 2016 - 09:32:48)
I2C:   ready
DRAM:  118 MiB
gBootLogPtr:00b80008.
spinor flash ID is 0x1940ef
partition file version 2
rootfstype squashfs root /dev/mtdblock5
gParameter[0]:node=bootargs, parameter=console=ttyS0,115200 mem=118M root=/dev/m                                                                                                                                                             tdblock5 rootfstype=squashfs init=/linuxrc.
TEXT_BASE:01000000
Net:   Detected MACID:e0:50:8b:99:64:04
PHY:0x001cc816,addr:0x00
s3l phy RTL8201 init

MMC:   sdmmc init
Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending throu                                                                                                                                                             gh gateway 192.168.1.1
Download Filename 'upgrade_info_7db780a713a4.txt'.
Download to address: 0x5000000
Downloading: #################################################
done
Bytes transferred = 73 (49 hex)
bootargs=console=ttyS0,115200 mem=118M root=/dev/mtdblock5 rootfstype=squashfs i                                                                                                                                                             nit=/linuxrc
bootcmd=sf read 0x2000000 0xf0000 0x180000;bootm 0x2000000
bootdelay=3
baudrate=115200
ipaddr=192.168.1.108
serverip=192.168.1.1
autoload=yes
gatewayip=192.168.1.1
netmask=255.255.255.0
da=tftp 0x02000000 dhboot.bin.img; flwrite;tftp dhboot-min.bin.img;flwrite
dr=tftp 0x02000000 romfs-x.squashfs.img; flwrite
dk=tftp 0x02000000 kernel.img; flwrite
du=tftp 0x02000000 user-x.squashfs.img; flwrite
dw=tftp 0x02000000 web-x.squashfs.img; flwrite
dp=tftp 0x02000000 partition-x.cramfs.img;flwrite
dc=tftp 0x02000000 custom-x.squashfs.img; flwrite
up=tftp 0x02000000 update.img; flwrite
tk=tftp 0x02000000 uImage; bootm
dh_keyboard=1
sysbackup=1
logserver=127.0.0.1
loglevel=4
autosip=192.168.254.254
autolip=192.168.1.108
autogw=192.168.1.1
autonm=255.255.255.0
pd=tftp 0x02000000 pd-x.squashfs.img; flwrite
ethact=ambarella mac
BSN=3E061C8PAA01681
HWID=IPC-HDBW2431R-Z-2713:01:02:05:23:20:00:01:00:00:00:04:2D0:00:00:00:00:00:01                                                                                                                                                             :00:00:200
devalias=IPC-HDBW2431R-ZS
hwidEx=00:02:00:00:00:00:00:00:00:00:00:00:00:00:00:00
ID=
ethaddr=E0:50:8B:99:64:04
appauto=1
stdin=serial
stdout=serial
stderr=serial
filesize=49
fileaddr=5000000
 

Максим Шелест

Специалист компании VIDIMOST

Vrolok

Member
Не редактировал. Скопировал полность весь лог как есть и удалив ID.
 

Vrolok

Member
Вечером попробую все что вы написали. Правда команды я прописываю в файле commands.txt который через батник генерирует upgrade_info_7db780a713a4.txt. Putty не реагирует на команды ctrl+c и подобные(зажав или быстро нажимая).
 

Vrolok

Member
Большое спасибо за помощь!!!Камеру запустил. Слетевший HWID прописал командой(этот ид больше всего подходил, взял его из check.img прошивки с офф.сайт)
Код:
setenv HWID IPC-HDBW2431R-Z-2713:01:02:05:23:20:00:01:00:00:00:04:2D0:00:00:00:00:00:01:00:00:200
saveenv
reset
 
Вверх