nvr5216-16p-4ks2 восстановление после прошивки

votsa

Member
Добрые люди помогите восстановить. Была прошивка 3.210.0002.2. прошил DH_NVR5XXX-4KS2_MultiLang_V4.001.0000003.2.R.201010.bin. Перезагружается. RS232 терминал пуст. С чего нужно начинать? спасибо
 

Техпідтримка VidiMost.com

Спеціаліст
Команда форуму
Терминал пуст. 40 сек логотип
что то либо с чипом 232 либо проверяйте свой шнур. Если есть логотип, значит есть и признаки первичной загрузки а значит должны быть данные в терминале.
 

votsa

Member
U-Boot 2010.06-svn4783 (Jun 22 2020 - 22:20:03)

In: serial
Out: serial
Err: serial
network is not supported
Hit any key to stop autoboot: 0
## Booting kernel from Legacy Image at 8b007fc0 ...
Image Name: Linux-3.10.0_hi3536
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1820080 Bytes = 1.7 MiB
Load Address: 8b008000
Entry Point: 8b008000
## Loading init Ramdisk from Legacy Image at 8e000000 ...
Image Name: initrd in squashfs
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 5509120 Bytes = 5.3 MiB
Load Address: 8e000000
Entry Point: 8e000000
XIP Kernel Image ... OK
OK

Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0x0
Linux version 3.10.0_hi3536 (jenkins@9bef5fc1736b) (gcc version 4.8.3 20131202 (prerelease) (Hisilicon_v400) ) #1 Sat Oct 10 10:44:03 CST 2020, svn:
CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: hi3536
Memory policy: ECC disabled, Data cache writeback
CPU: All CPU(s) started in SVC mode.
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
selected_console -1
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 54648k/54648k available, 10888k reserved, 0K highmem
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:160
sched_clock: 32 bits at 125MHz, resolution 8ns, wraps every 34359ms
Calibrating delay loop... 1790.77 BogoMIPS (lpj=8953856)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys freezer
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0xc0302118 - 0xc0302170
NET: Registered protocol family 16
DMA: preallocated 2048 KiB pool for atomic coherent allocations
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
Serial: AMBA PL011 UART driver
uart:2: ttyAMA0 at MMIO 0x120a0000 (irq = 40) is a PL011 rev2
console [ttyAMA0] enabled
bio: create slab <bio-0> at 0
SCSI subsystem initialized
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource timer2
NET: Registered protocol family 2
TCP established hash table entries: 512 (order: 0, 4096 bytes)
TCP bind hash table entries: 512 (order: -1, 2048 bytes)
TCP: Hash tables configured (established 512 bind 512)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (junk in compressed archive); looks like an initrd
Freeing initrd memory: 5376K (c3001000 - c3541000)
NetWinder Floating Point Emulator V0.97 (double precision)
CPU PMU: probing PMU on CPU 0
hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
msgmni has been set to 117
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
brd: module loaded
mousedev: PS/2 mouse device common for all mice
oprofile: using timer interrupt.
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
NET: Registered protocol family 15
lib80211: common routines for IEEE802.11 drivers
VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
registered taskstats version 1
RAMDISK: squashfs filesystem found at block 0
RAMDISK: Loading 5379KiB [1 disk] into ram disk... done.
VFS: Mounted root (squashfs filesystem) readonly on device 1:0.

_ _ _ _ _ _ _ _ _ _ _ _
\ _ _ _ _ _ ___
/ /__/ \ |_/
/ __ / - _ ___
/ / / / / /
_ _ _ / / / \/ \_ __
___\\___

[RCS]: /etc/init.d/S00devs
[RCS]: /etc/init.d/S01udev
[RCS]: /etc/init.d/S80network
[RCS]: /etc/init.d/S99dahua
Hisilicon Media Memory Zone Manager
Module himedia: init ok
hi3536_base: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
load hi3536_dccs.ko ok
load sys.ko for Hi3536...OK!
load vdec.ko ....OK
load vhd firmware.ko OK
Load hi_jpegdec.ko success. (SDK_VERSION:[SDK_VERSION] Build Time:[Jun 14 2016, 09:20:35])
load region.ko ....OK!
load vgs.ko for Hi3536...OK!
load viu.ko ...OK!
load vpss.ko ....OK!
load vou.ko ....OK!
load rc.ko for Hi3536...OK!
load venc.ko for Hi3536...OK!
load chnl.ko for Hi3536...OK!
load h264e.ko for Hi3536...OK!
load jpege.ko for Hi3536...OK!
load vda.ko ....OK!
console [vtty0-1] enabled
Auto login as root ...
login[420]: root login on 'ttyS000'

[1;32mWelcome to HiLinux.[0;39m
None of nfsroot found in cmdline.
~ #
 

Техпідтримка VidiMost.com

Спеціаліст
Команда форуму

тут и еще в нескольких темах уже обсуждали как востновить NVR 5-й серии 4KS2
 

votsa

Member
и там и там есть. Я не успеваю ничего прописать. Через 30 сек. перезагрузка
 

Техпідтримка VidiMost.com

Спеціаліст
Команда форуму
в путтти по нажатию правой кнопки мыши происходит вставка текста из буфера.

sip Ваш айпи компа
lip айпи рега
run up

или
setenv ipaddr Ваш ip компа
setenv serverip айпи рега
run up
 

fobos

Энтузиаст
загрузку можете остановить по нажатию * и показать вывод команды printenv?
 

fobos

Энтузиаст
в путтти по нажатию правой кнопки мыши происходит вставка текста из буфера.

sip Ваш айпи компа
lip айпи рега
run up

или
setenv ipaddr Ваш ip компа
setenv serverip айпи рега
run up
регистратор сваливается в bosybox...там эти команды не проходят
 

votsa

Member
1188


hisilicon # 'help'
? - alias for 'help'
base - print or set address offset
boot - boot kernel from uboot
bootd - boot kernel from uboot
bootm - boot application image from memory
cmp - memory compare
cp - memory copy
crc32 - checksum calculation
devid - devid - set hardware id and save to flash

eracfg - eracfg - erase config sectors

eralogo - eralogo - erase logo sectors

fb_set - fb_set - get shift key

fb_test - fb_test - frontboard read/write test

get_key - get_key - get shift key

go - start application at address 'addr'
help - print command description/usage
hwid - hwid - set hardware id and save to flash

loadb - load binary file over serial line (kermit mode)
loady - load binary file over serial line (ymodem mode)
loop - infinite loop on address range
mac - mac - set mac address and save to flash

mac1 - mac1 - set mac1 address and save to flash

md - memory display
mm - memory modify (auto-incrementing address)
mtest - simple RAM read/write test
mw - memory write (fill)
nm - memory modify (constant address)
printenv- print environment variables
reset - Perform RESET of the CPU
setenv - set environment variables
version - print monitor version
hisilicon #
 
Зверху